Driven Belt

  • Driven Belt
Click on the image to enlarge
(based on 1 reviews)
Interested in this product? Get in touch now »

About Driven Belt

Product Code: APM Driven Belt

Belt conveyors with roller bedding.

Roller bedding is recommended for lengths over 5m.


First choose a conveyor of the disired length and width

Then choose a belt of a corresponding length and width.


As standard, the motor is fitted on the right hand side of the belt conveyor, seen in the direction of travel.

If the motor needs to be mounted on the left side, this must be stated upon ordering


The construction makes the conveyors odeal for new as well as exisiting systems.

Low noise level and smooth surfaces.

An economical solution for long-distance transportation.

Belts and supports are ordered seperately.  Available in many options - up, down, sloped and many more....



Tubes ? 48mm impact proof plastic.  Drive unit 0.12 kW or 0.37 kW.  Gear Standard 40:1 = 10 m/min.  Other gearings available.  A frequency control system can be connected direct to the 3 phase motpor.  Frames Electro-galvanised steel.  Widths available 200, 300, 400, 500, 600mm.  Length available ranging from 0.75m to 10m.

Find out more

To register your interest in our products, please complete the form below and we'll be delighted to help.